Bio Safety Cabinet Class II Type A2

Bio Safety Cabinet Class II Type A2
4.0 Rating

₹1,08,000

Class Class II
Product Type Type A2
Nominal Size 2 ft
Model PLT-275
Air Flow Direction Vertical
Country of Origin Made in India

Biosafety Cabinet Class II (PLT-275)APPLICATIONS OF BIOSAFETY CABINET

  • “BIOSAFETY BIOLOGICAL SAFETY CABINET Class II re-circulates 70% of air through HEPA filter & 30% Exhaut
  • TANCO" Biosafety Cabinet is used to protect personel, product and the environment from exposure to biohazards and cross contamination during routine procedures.
  • Used for various applications in the life science, clinical, pharmaceutical and industrial laboratory.
  • These Cabinets are designed to provide 3 basic types of protection.
      Personnel protection from harmful agents inside the cabinet.
      Product protection to avoid contamination of the work, experiment or process.
      Environment Protection

SALIENT FEATURES & CONSTRUCTION OF BIOSAFETY CABINET

  • Low Cost
  • Low Noise
  • User Friendly Ergonomic Design
  • Controlled Environment Particulate Free Product Protection.
  • Work area surrounded by negative pressure, double wall plenums for protection.
  • Aerodynamic designed airflow grille maintains safety by preventing blockage.
  • Free Blower ensure noiseless operation.
  • 70% of the air is re-circulated through the HEPA filter.
  • The contaminated air is drawn by the blower through the plenum of the cabinet.
  • 30% of the air is exhausted from work area.
  • Filtered Exhaust - protects ambient environment, and avoids build up, air borne particles.
  • The exhaust of Safety Cabinet is connected to the Virus Burn out Unit for product and personnel protection.
  • Air is drawn through Pre-Filter and is made to pass through high effective HEPA (High Efficiency Particular Air) filters.
  • The efficiency of HEPA Filter is greater than 99.97% down to 0.3 micron.
  • Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel (SS-304) (as ordered).
  • Working table is made of Stainless Steel Sheet (SS-304 grade).
  • Window opens to 20cm±5mm working height with predefined locking device.
Model No BSC-1 BSC-2 BSC-3 BSC-4
Working Table Size 2'' x 2'' 3'' x 2'' 4'' x 2'' 6'' x 2''
Working Size 2'' x 2'' x 2'' 3'' x 2'' x 2'' 4'' x 2'' x 2'' 6'' x 2'' x 2''
HEPA Filter Size 2'' x 2'' x 6" 3'' x 2'' x 6" 4'' x 2'' x 6" 3'' x 2'' x 6"
No. of Motor/Blower 1 1 1 1
Illumination 1 x 40 w 1 x 40 w 2 x 40 w 2 x 40 w
Cabinet Materiel Wooden or Cold Rolled Steel Powder Coated or Stainless Steel (SS-304)
Work Table Stainless Steel (SS-304 grade)
View Window In work chamber to monitor the samples
Main Filter HEPA Filter (99.97% efficient at 0.3 micron particles)
Pre-Filter High efficiency pre-filter (Washable)
Sterlization By U. V. Germicidal Tube in work area
Manometer Static pressure analogue type.
Sliding Sash Counter balanced door for effortless operation
Noise Level Less than 65 db
Standard Accessory Gas/Air cock and Multipoint 15/5 Amp. electric socket
Electric Supply AC 230V, 50/60Hz

Happy Customers Said

At Turn Key Labs, our success is measured by the satisfaction of our clients. We take pride in delivering top-notch solutions that exceed expectations, earning us glowing reviews and long-term partnerships.

Free Consultation of Plant Setup

Expert will guide you through every step, from initial planning to final execution

Free Designing of Laboratories

Our specialists create customized layouts tailored to your specific needs

Minimum one year Warranty

One year on-site warranty on every product for any issues that arise